Trim Insert Repair kit Instructions

#1 Remove left over tab with pliers


We recommend using a dremel tool to remove the excess after the pliers.
Use what ever works best for you.
You must get the surface smooth.


                                                                           Note: We do not supply metal retainer as shown at the moment. 

                                                              Use existing retainer. Lightly place on top of tab and push done untill its seated.

Glue the bottom of the replacement tab given.

We reccomend JB Weld SuperWeld but
any super glue should work.

They should be glued in like this

Important: If you want to remove your trim after installation you must pop out the tabs from the back side of your bezel. If you pry the trim insert from the front to get the trim out, you will break the replacement tabs.

    Your Cart
    Your cart is empty